The Siratrol®
The SiraTrol SCB-1 One-Way Siren Controller
Introducing the new SiraTrol™ SCB Series Siren Controller! This Radio Activated Siren Controller is available in One Way DTMF, Two-Tone, Single Tone, Two-Way Encrypted DTMF, and Quad Band Cellular formats.
Our DTMF model can decode and encode a wide range of DTMF speeds, including Whelen's 10-digit 40/20 DTMF Timing.
Our Two-Tone and Single Tone decoder can decode 260-3500hz tones with lengths ranging from 0.1 second to 9.9 second timing ranges. The decoder also features adjustable tone bandwidth.
Each controller can be programmed with 8 individual DTMF, or 8 Individual Two-Tone or Single Tone commands for a total of 16 possible activation or cancel sequences. Two-Tone and DTMF can be utilized at the same time, allowing multiple different communication systems to operate in tandem with the siren controller at the same time.
Our controllers come standard with encryption capability to safeguard against any potential "hacking" of your siren system. They can also be upgraded to two-way communication capability without the need of changing any major components.
Our Quad Band Cellular option is a great option for a single siren as you can control it from anywhere you have cell service. The numbers authorized to activate the controller can be white-listed, ensuring secure siren activation. There are also local dry contact closures which can be tied to sensors on the siren. This allows the controller to send a text message when a cabinet is opened, or if the siren is activated.
For more information, please contact us below.
Models
- SCB-1 VHF (DTMF/Two Tone VHF RX)
- SCB-1 UHF (DTMF/Two Tone VHF RX)
- SCB-1 Cellular (Cellular Activate/Deactivate Module)
- SCB-2 VHF (Encrypted Two-Way, VHF RX/TX)
- SCB-2 UHF (Encrypted Two-Way, UHF TX/RX)
- SCB-3 (Encrypted SiraTrol Computer Base Station)
More info:
For ordering and pricing information, please contact us below, or view our brochure.
SiraTrol Two-Way
Affordable and Reliable Remote Siren Monitoring
Ease of use.
Our SiraTrol® Two-Way siren control system offers the convenience of remote monitoring. The system is polled daily at a time of your choice to ensure your siren system is ready to operate at all times.
Feedback you can trust.
During a live, audible test, the controller automatically checks all aspects of siren operation, such as Sound Output, AC Voltage, Battery Voltage, Rotation, and Current. Unlike our competitors, we don't rely solely on current and other electronic signals to verify your siren worked - our controller actually listens for it. The controller can also transmit the audio being heard inside the siren control cabinet over radio so you can actually listen to the siren remotely. Commands can be sent to siren sites globally, locally, or through the SiraTrol SCB-3 base station encoder, which enables full control of your siren system, even during a computer failure.
Built-In-Redundancy.
All SiraTrol systems feature an automatic command-repeat that ensures the signal reached all of your siren sites.
Selective Commands.
Our base station software offers the ability to configure up to 8 hotkeys of your choice. Once a hotkey is selected, the user can select from a set of pre-defined groups, or zones, providing selective control of your siren system. Each siren can also be selected individually, and activated for a period of time that the user can select.
Secure.
All commands to-and-from the siren controllers and the base station are time-encrypted and stamped. Each command received is also recorded on the siren control unit via a micro-SD card. This protects the siren system from being accessed and hacked by a malicious party. Each controller also features an intrusion circuit. When connected to all cabinets on the siren unit, it will provide an immediate and audible alarm at the base station signifying the siren has been tampered with, protecting your community from vandalism and battery theft.
Learn More
If you are interested in our SiraTrol system, or would like to send a demo, please reach out to us below.